Filter Cartridge (Small)

£27.23

Our spa water filter uses a Microban filter media to prevent microbial growth.

Compare
SKU: 3346 Categories: ,

Description

Filter Cartridge (Small)

While you relax, body oils and other contaminants are removed by large capacity cartridge filters that ensure 100% filtration of the water many times each day.
For simple system maintenance filters can be easily taken out and replaced.
Our spa water filter uses a Microban filter media to prevent microbial growth.

Filter cartridge (small) is suitable for the following spas:

Bahama, Samoa, Ibiza, Borneo, Robinson, Everest, Cancun

Reviews

There are no reviews yet.

Be the first to review “Filter Cartridge (Small)”

Your email address will not be published. Required fields are marked *

Delivery and Logistics

Free local delivery up to 30 miles. Please call to discuss rates over this distance.  This service may be carried out by our own teams or by a contractor. Spa will be delivered to the nearest vehicular accessible hardstanding area to your entrance. Conditions apply and may change without notice, please discuss with us first.

Optional Local Commissioning Service

For deliveries within 90miles of GU99JX you can book our Commissioning service.

Urban Hot Tubs Commissioning Charge
Kyoto £249
Roma £249
Marrakech £299
Sorrento £299
Sorrento Elite £349

 

  • Manoeuvring the spa around the house via a suitable access route (it is your responsibility to ensure the route is sufficiently wide, level, and tall enough to wheel the spa along).
  • Placing the spa in its final position
  • Unwrapping and checking all.
  • Cleaning and sanitising surfaces.
  • Connecting to a suitable power point*
  • Fitting any accessories supplied by us, cover lifter, side table etc
  • Filling from your hose and bleeding system if required
  • Checking and tightening any unions and connections as required
  • Demonstrating how to dose with chemicals
  • Handover training in maintenance and safe use.
  • Clearing and removing all packaging.

If, due to distance, it is not viable for our team to carry out the commissioning service, we will provide instructions and free phone support to assist you with the commissioning aspect or we may be able to assist you finding a local Hot tub technician to carry out the commissioning service.

Pre-Delivery Survey

For local deliveries we will usually carry out a pre-delivery survey to confirm that there is suitable access widths, heights, corner manoeuvring space, and no obstructing obstacles. We can also advise of any pre-delivery access work needed, such as gates, drainpipes, etc that may need to be temporarily removed prior to our arrival.

For longer distance deliveries we will request a walk through video and commentary pointing out any obstacles, so that we can discuss and resolve any issues prior to the day. During the survey particular attention is required to there being sufficient clear width right up to the full height of the spa on its side on the trolly (add 20cm for the trolly height), plus the amount of “swing” space required to get the spa around a tight corner. Protruding window cills, overflow pipes, gutters, steps, bushes, gates, boiler vents, trellis, fence posts, slopes, corners, carport roofs, all can turn what at first hand looked straightforward into anything but.

Crane/Hiab lifts

If a crane lift is the only solution then this must be arranged between the customer and crane company. We can often suggest reliable local crane companies and will assist with logistical details but the lifting contract is always solely between the customer and the crane company.

Manoeuvring the spa

Our Commissioning service is carried out by to two operatives working from one vehicle and manoeuvring the spa on a trolley. The spa is normally on its side. If in the opinion of the team leader the access is not suitable without undue risk of damage to the spa or operatives, the delivery will revert to kerbside only pending alternative arrangements being made. If suitable on-site storage is not available we can return the spa to our warehouse pending arrangements being made but any subsequent delivery will be chargeable.

Electrical power point

Plug’n’Play

Models with a single massage pump are factory configured to run from a standard domestic 13amp electrical socket. The spa will automatically prevent the Heater from running whenever the massage pump in use. There will still be some heating effect though from the pump motor. It is a very quick job to change settings so that the massage pump and heater can run together, though the spa will then need to be “hard-wired” (see below) as in that configuration it will need more power than the domestic 13a socket can provide.

Hard wired 32amp socket

Any Spa with 2 or more massage pumps (or a single pump models if running the pump and heater concurrently) need to be wired directly back to your consumer unit (fuse box) using a suitable size of Armoured (SWA) cable. This is a job for a qualified Electrician. The cable must run directly from the consumer unit to a water resistant isolator switch positioned close to but not within 2m of the Spa, and from there to an adjacent “32amp Blue Commando socket”. It should be protected by a “B type” 32amp or 25amp MCB trip

This work should be signed off to “Part P” certification and must be completed prior to any commissioning date. For local deliveries we can recommend electricians and we will be pleased to liaise with any contractors you engage in order to minimise any potential misunderstandings.

Filling the Spa

We rely on there being a suitable hose with fittings on site that will comfortably reach from a suitable mains fed cold water tap to the spa when it is in its desired position. The water must be direct mains fed and not from a tank or via a water softener. Please contact us to discuss if this is not the case.